mini-circuits - specification for power splitter - jspq-ed8004/1 power splitter notes: ? for surface mount environmental specifications, please click here. re-flow soldering information is available in "surface mount" article. ? non-catalog model. please consult factory for price and delivery. ? general quality control procedures and environmental specifications are given in mini-circuits guarantees quality. hi-rel, mil description are given in hi-rel and mil ? prices and specifications subjects to change without notice. jspq-ed8004/1 2 way-90 frequency mhz isolation, db insertion loss, db avg. of coupled outputs less 3db phase unbalance degrees amplitude unbalance, db f l - f u l typ. min. m typ. min. u typ. min. l typ. max. m typ. max. u typ. max. l max. m max. u max. l max. m max. u max. 6.00-90 l=low range(f l to 10f l ) m=mid range(10f l to f u /2) u=upper range(f u /2 to f u ) pin connections port sum port port 1 port 2 gnd ext mq 1 7 8 all other pins case style - bk276 (inch,mm ) weight: 3 grams. a b c d e f g h j .470 11.938 .803 20.396 .100 2.540 .250 6.350 .102 2.591 .100 2.540 .047 1.194 .065 1.651 k l m n p q r s t .065 1.651 .490 12.446 tolerance: .x .1 .xx .03 .xxx .015 inch. material and finish: base: glass epoxy laminate. cover: copper-nickel alloy. leads: tin-lead plate or tin plate iron-nickel alloy. freq (mhz) insertion loss amplitude unbalance (db) isolation phase unbalance (degrees) freq (mhz) vswr s vswr 1 vswr 2 (db) s-1 (db) s-2 (db) 1-2 6.000 3.27 3.38 0.110 39.28 87.09 6.00 1.15 1.23 1.30 7.000 3.27 3.37 0.100 39.85 88.95 7.00 1.13 1.23 1.26 8.000 3.28 3.37 0.090 40.32 89.88 8.00 1.12 1.23 1.22 9.000 3.28 3.37 0.080 40.71 90.31 9.00 1.11 1.22 1.19 10.00 3.29 3.37 0.080 41.02 90.35 10.00 1.10 1.20 1.16 11.00 3.29 3.39 0.100 41.29 90.35 11.00 1.09 1.18 1.14 12.00 3.29 3.39 0.100 41.53 90.14 12.00 1.08 1.16 1.12 13.00 3.29 3.39 0.100 41.78 90.00 13.00 1.08 1.14 1.10 14.00 3.29 3.40 0.110 42.00 89.86 14.00 1.07 1.12 1.08 15.00 3.29 3.41 0.130 42.20 89.73 15.00 1.07 1.10 1.07 20.00 3.31 3.47 0.150 43.16 89.64 20.00 1.06 1.01 1.05 25.00 3.35 3.52 0.170 43.96 90.17 25.00 1.08 1.10 1.09 30.00 3.40 3.57 0.170 44.63 90.85 30.00 1.10 1.19 1.15 35.00 3.45 3.63 0.170 44.91 91.34 35.00 1.13 1.27 1.20 40.00 3.51 3.68 0.170 44.80 91.62 40.00 1.16 1.33 1.25 45.00 3.56 3.73 0.170 44.35 91.63 45.00 1.19 1.38 1.30 50.00 3.59 3.78 0.180 43.55 91.46 50.00 1.22 1.42 1.35 55.00 3.63 3.82 0.190 42.87 91.11 55.00 1.24 1.45 1.39 60.00 3.66 3.87 0.200 42.11 90.61 60.00 1.26 1.47 1.43 65.00 3.69 3.91 0.220 41.48 89.95 65.00 1.29 1.47 1.47 70.00 3.70 3.94 0.230 40.93 89.36 70.00 1.30 1.47 1.51 75.00 3.71 3.98 0.270 40.39 88.65 75.00 1.32 1.46 1.55 80.00 3.73 4.02 0.290 40.04 87.87 80.00 1.34 1.45 1.58 85.00 3.72 4.05 0.330 39.73 87.14 85.00 1.36 1.44 1.61 90.00 3.74 4.09 0.350 39.46 86.40 90.00 1.38 1.42 1.65 http://www.minicircuits.com/cgi-bin/spec?cat=splitter&model=jspq-ed8004/1&pix=bk276.gif&bv=4 (1 of 2) [6/30/2004 11:10:03 pm]
mini-circuits - specification for power splitter - jspq-ed8004/1 packaging: packaging information: tape width(mm): 32 reel size(inches): 13 device cavity pitch(mm): 16 devices per reel: 500 back http://www.minicircuits.com/cgi-bin/spec?cat=splitter&model=jspq-ed8004/1&pix=bk276.gif&bv=4 (2 of 2) [6/30/2004 11:10:03 pm]
i2 technologies us, inc. html pages converte d to pdf document this document contain component information from the manufacturer's website which ar e not available in a revision controlled document from the ma nufacturer. to facilitate the addition of these parts into th e electronics database, we are converting the html pages rela ted to that part, from the manufacturer's website into adobe pdf format. the contents of this document is based on the in formation provided on the manufacturer's website, therefor e the information may have been changed by the manufacturer since this was created. powering the bottom line ? i2 technologies us, inc. 15445 innovation drive san diego, ca 92128
|
